无线DMX512接收器

                                                         MODE：XLRR-WI-DMX

简介：

无线DMX512接收器以无线的方式传输标准的DMX512控台数据，也可传输灯具与灯具间的联机数据，该产品彻底解决了灯光控制台与灯，灯与灯之间数据的无线传输，完全去掉长期以来所依赖的双绞线。在数据的传输过程中做到无时延，数据实时可靠！该产品采用2.4G全球开放ISM频段，免许可证使用. 高效GFSK调制，126频道自动跳频通信设计，抗干扰能力强.

适合领域:舞台灯光、大型文艺演出、体育馆灯光、临时舞台演出 、城市灯光系统 、电视台 、 会议中心 、专业剧院 、主题公园 、歌舞厅、酒吧和小型文艺演出 .

产品性能指标

1. 产品名称：2.4G无线DMX512接收器
2. 三基色LED显示
3. 126个频段自动跳频，自动选择无干扰频段，保障通讯的可靠性.
4. 7组ID编码可设置，用户可在一个地方使用独立的7组无线网络而互不干扰.
5. 输入电压：5VDC 500mA MIN
6. 通讯距离：400M（空旷地，视环璄的不同而有所改变）
7. 工作频段：2.4GISM,126个频段.
8. 接收灵敏度：-106dBm
9. DMX信号接口：3PIN母插

操作说明：

1. ID码与LED颜色对应关系：

l        1：RED---------------------------红

l        2：GREEN-----------------------绿

l        3：RED+GREED---------------黄

l        4：BLUE--------------------------兰

l        5：RED+BLUE------------------紫

l        6：GREEN+BLUE--------------青

l        7：RED+GREED+BLUE------白

1. 按一下按键显示当前的ID设置，再按进行ID设置，每按一下ID数值加1
2. 工作状态：

l        LED常亮：没有DMX或无线信号

l        红色LED闪动：发送

l        绿色LED闪动：接收

1. 射频频率- - - - - - - - - - 
   
   - - - - - - - - 2. 400-2. 525 G，共126个频段，自动选择不需设置
2. ID编码- - - -“1-7”组ID编码，按”KEY”调节，只有ID码相同的接收器才能相互通讯.

通信的建立：

1. 接收器插入灯具
2. 按”KEY”把要通讯的接收器ID设成相同。如在同一个地方要使用一组以上的无线网络时则各网络的ID要不相同.
3. 发送器收到DMX数据后选择无干扰频段发送数据红色LED闪动，接收器向上改变通信频段，，直到收到相同ID码的正确数据此时绿色LED闪动，DMX数据越快LED闪动越快
4. 此时通讯正确建立

注意事项：

²         户内使用

²         非人为原因，产品一年免费更换、维修.

²         在产品免费期内，私自打开或维修过的产品，不享受厂家免费待遇.

²         接收器不可私自维修.需要维修时返回生产厂商处理

²         接收器工作环境应在-20°C~+45°C，10%～90%RH，无凝结，以保证使用寿命。

²         接收器上不能覆盖物品，定期清理以免形成尘积。

DMX512 Wireless Receiver

                                                                                  Model No.:

Product Profile：

DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data by wireless way, which solve lighting control issues of wireless transmitting completely between lighting controller and lighting, lighting and lighting and so on. It gets rid of relying on connecting cables completely.

And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliable. This product adopts global free 2.4GHz ISM frequency band. High effective GFSK modulation,communication design is 126 channels jumping frequency, high anti-jamming ability.

Application:

Stage lighting、Disco hall、Large literature performance、Gymnasium lighting、Temporary stage performance、City lighting system、TV station、Conference center、Professional showplace、Theme parks、Bar lighting and so on.

Product Feature:

Model Name: 2.4GHz Wireless DMX512 Receiver

Tricolor LED displaying

126 channels automatical jumping frequency, high anti-jamming ability to ensure working reliability.

7 groups ID code settable, User can use 7 groups individual wireless net without any interfere each other in the same place.

Input voltage: 5VDC 500mA MIN

Communication distance: 700M

Work frequency section: 2.4GHz ISM band,126 channels frequency section.

Receiver sensitive: -106dBm

DMX signal port: 3 Pin female plug

Operating manual：

1. ID code and LED color corresponding correlation：

l        1：RED

l        2：GREEN

l        3：RED+GREED = YELLOW

l        4：BLUE

l        5：RED+BLUE = PURPLE

l        6：GREEN+BLUE = CYAN

l        7：RED+GREED+BLUE = WHITE

1. Press key 1 time to indicate ID setting,，Press again to set IC，then ID value adding 1 each time.by press
2. Working condition：

l        LED constant lit up：no DMX or wireless signal.

l        Red LED flash：transmitting.

l        Green LED flash：Receiving

1. RF frequency- - - - - - - - - - - - 2. 400-2. 525 G，total 126 channels，it’s searching automatically,
2. ID Code- - - -“1-7” groups ID code，press ”KEY” for setting，it only can works under same ID code.of transmitter and receiver.

Establishing Communication：

1. Plug the receiver into the light fixture.
2. Press “Key” button to set same ID value of transmitted board and received board,please use different ID value if you need use more than 1 group wireless net at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.
4. Communication was established correctly then

Caution:

²         Indoor use only.

²         1 year warranty, repairmen, free replacement except damaged artificially

²         The manufacturer will not offer free service in warranty period if any repaired or uncapped had happened

²         It’s better to return to manufacturer if repairmen is must, don’t do any repairmen unless qualified electrician.

²         The working condition should be under temperature -20°C~+45°C, 10%～90%RH, no congelation, so as to ensure it’s lifetime。

²         It can’t be covered by any superstratum, it should be swept periodical to prevent dust